X8 carbon fibre Hexacopter complete built and test flown system

Be the first to review this product

Availability: In stock

As low as: £890.00

Price as configured: £890.00

Quick Overview

Our new Pro Spec build X8 carbon fibre folding Hexacopter with Pixraptor flight controller and Neo8 GPS as standard.


These are powered by 6S Lipo powering X5 3515 400Kv motors with lots of power to spin the 14"x4.8" direct fit carbon fibre props that we supply with them. Using the direct fit props provides added strength and better balancing due to not having a hub.


These come with the Pixraptor flight controller as standard. With the Neo8 GPS/compass as standard for super accurate (0.6m) position holding.


This is a very capable and stable rig, ideal for aerial filming with a 3Axis gimbal system.


They are very light weight so with a 6S 10,000mAh lipo they are just over 2.3Kg all up flying weight. So you should get about 15 minutes of flying time. Or up to 25 minutes when using an 16000mAh Lipo.


These units are custom built for each order and test flown with the content of your order before being dispatched so you can just take them out of the box and start flying without having to worry about calibrating or setting things up.


The battery tray is vibration mounted which is also the Gimbal mount so the mass of the battery acts as the vibration dampener making filming very smooth.


We normally complete orders for systems within 1 to 2 weeks from date of order depending on work load. You can always call us or check your order status which is updated and emailed to you during the process.


See full description below for more information.

X8 carbon fibre Hexacopter complete built and test flown system

More Views

1 x X8 850mm carbon fibre Hexacopter frame   +£0.00
1 x Pixhawk Special STM32 Pixhawk based flight controller   +£0.00
1 x Ublox Neo8 GPS module with compass   +£0.00
8 x X5 3515 400Kv high efficiency motor for multirotors   +£0.00
8 x Hobbywing X-Rotor 40Amp Opto ESC   +£0.00
4 x 14" x 4.8" carbon fibre direct fit props for large hexacopter (pair 1xCW & 1xCCW)   +£0.00
1 x Pixhawk APM Power module with BEC   +£0.00

* Required Fields

Price as configured: £890.00

Details

Our new Pro Spec build X8 carbon fibre folding Hexacopter with Pixraptor flight controller and Neo8 GPS as standard.

These are powered by 6S Lipo powering X5 3515 400Kv motors with lots of power to spin the 14"x4.8" direct fit carbon fibre props that we supply with them. Using the direct fit props provides added strength and better balancing due to not having a hub.

These come with the Pixraptor flight controller as standard. With the Neo8 GPS/compass as standard for super accurate (0.6m) position holding.

This is a very capable and stable rig, ideal for aerial filming with a 3Axis gimbal system.

They are very light weight so with a 6S 10,000mAh lipo they are just over 2.3Kg all up flying weight. So you should get about 15 minutes of flying time. Or up to 25 minutes when using an 16000mAh Lipo.

These units are custom built for each order and test flown with the content of your order before being dispatched so you can just take them out of the box and start flying without having to worry about calibrating or setting things up.

We normally complete orders for systems within 1 to 2 weeks from date of order depending on work load. You can always call us or check your order status which is updated and emailed to you during the process.

The battery tray is vibration mounted which is also the Gimbal mount so the mass of the battery acts as the vibration dampener making filming very smooth.

For a complete aerial photography or FPV package you will need to select from the tions below:
Brushless gimbal
video lead
video transmitter
video receiver & USB AV capture card (if using your laptop as the video screen or your laptop as a ground control station)
or instead of the video receiver above we have a 7" FPV monitor with built in battery and video receiver
we recommend the circular polarised antenna set to imrpvoe video quality and range
minimOSD (provides the flight data overlaid on the video screen with flight battery info and arrow to home etc

The 3DR Radio telemetry kit allows you to control the quadcopter from your laptop as a true ground control station. If you like you can even fly the quadcopter with a Joystick as demonstrated in our video on YouTube: Flying a quadcopter with a Joystick in Mission Planner
When using the 3DR Radio telemetry you don't need the minimOSD as the flight data is passed through the telemetry link.
To get the ground control station system as demonstrated in the video you will need:
3DR radio telemetry kit
video transmitter
circular polarised antenna set
video receiver
USB AV capture card
1000mAh lipo to power the video receiver
camera of your choice

Additional Information

Special Price No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.