Accessories

Items 1 to 10 of 25 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. minimOSD On Screen Display system for APM or Pixhawk

    minimOSD On Screen Display system for APM or Pixhawk

    £20.00

    minimOSD On Screen Display system for APM & Pixhawk
    This addon for the APM & Pixhawk plugs into the telemetry port of your APM or Pixhawk then you put your video feed from your camera into one side and your video transmitter in the other side.
    It then overlays the video being sent to your video receiver with the flight data as a full On Screen Display system.
    You can configure the layout & whats is displayed using an FTDI adapter (see related products below).

    Learn More
  2. 3S 1000mAh lipo for video receiver, transmitter & gimbals

    3S 1000mAh lipo for video receiver, transmitter & gimbals

    £10.00

    This battery is ideal for powering our video receivers.


    It has a JST plug so can be plugged directly into the power lead of the video receiver.


    This lipo will keep the video receiver going for about 3 to 4 hours on a single charge.


    If you run a 4S lipo as your main flight battery then this is required to power your video transmitter and gimbal as they need 3S.

    Learn More
  3. FrSky RSSI lead for digital to analogue signal conversion for APM

    FrSky RSSI lead for digital to analogue signal conversion for APM

    £5.00

    This is a lead to connect the RSSI signal output of the X8R receiver to your APM. It works great for the Arduplane firmware (set the RSSI voltage to 3.3V) but you will have to wait for the 3.2 Arducopter firmware for the option to set the RSSI voltage. Learn More
  4. Bluetooth 433Mz Radio telemetry kit Ground Control Station

    Bluetooth 433Mz Radio telemetry kit Ground Control Station

    £70.00

    This is a compbined unit of the 433Mhz Radio telemetry kit Ground Control Station system with a Bluetooth Module and lipo battery built in a nice case.


    One unit plugs into the APM or Pixhawk telemetry port and the other connects to your Andoid tablet or phone via Bluetooth or just plug it into your USB port on your computer to provide a long range live link to your APM/Pixhawk. The built in Lipo of the ground module is charged vbia the USB port.


    You can use it to change parameters, load missions and real time Ground Control Station during flights. The flight data screen of Mission planner will show you on a google satellite map where your model is and all the status information including a detailed heads up display.


    You can even fly your model from your laptop, Android tablet or phone using this kit.


    The normal range with the supplied antennas is about 500m If you add an inverted V antenna mounted about 15m high using an active USB extension you can get ranges up to 10,000m with this kit.


    Download the drivers for these: http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

    Learn More
  5. iOSD mini for DJI

    iOSD mini for DJI

    £45.00

    iOSD mini for DJI Naza systems Learn More
  6. Pixhawk APM Power module with power distribution

    Pixhawk APM Power module with power distribution

    £16.00

    Power module & power distribution plate with BEC for Pixhawk or Pixraptor
    This connects in line to your Lipo and allows your Pixhawk or Pixraptor to monitor your flight battery.
    The data can then be seen on your minimOSD (On Screen Display) system, Ground Control Station (GCS) it can also trigger failsafe of your Pixhawk or Pixraptor when your battery gets low.
    This unit has a BEC built into it so plugs into the Power port of your Pixhawk or Pixraptor.
    If you have servos connected to your Pixhawk or Pixraptor then you still need another BEC plugged into the one of the Output ports to power your servos.


    These work with up to 6S (24V)

    Learn More
  7. Neutral Density ND4 filter lens for GoPro

    Neutral Density ND4 filter lens for GoPro

    £15.00

    Neutral Density ND4 filter lens for GoPro Learn More
  8. minimOSD cased version On Screen Display system for Pixhawk

    minimOSD cased version On Screen Display system for Pixhawk

    £25.00

    Cased version of the minimOSD On Screen Display system for Pixhawk or APM flight controllers


    This addon for the Pixhawk or APM plugs into the telemetry port of your Pixhawk/APM then you put your video feed from your camera into one side and your video transmitter in the other side. It then overlays the video being sent to your video receiver with the flight data as a full On Screen Display system. You can configure it using an FTDI adapter (see related products below).
    When trying to program these with your FTDI adapter you will need an adapter cable. If you order this minimOSD and FTDI adapter together then we will supply the cable with the kit.


    These come with the cable to plug them into a Pixhawk. If you need an APM cable then put a note on your order and we will provide them with the APM cable instead.

    Learn More
  9. SiK Radio telemetry kit 433Mhz 500mW Pixhawk Ground Control Station

    SiK Radio telemetry kit 433Mhz 500mW Pixhawk Ground Control Station

    £70.00

    SiK Radio telemetry kit 500mW 433Mhz Ground Control Station for Pixhawk
    These are a pair of TTL SIK radio modules. They are not manufactured by 3DR but are made to the opensource specification of the SIK radio project.


    One unit plugs into the Pixhawk telemetry port and the other into your USB port on your computer or Android Tablet to provide a long range live link to your Pixhawk.


    You can use it to change parameters, load missions and real time Ground Control Station during flights. The flight data screen of Mission planner will show you on a google satellite map where your model is and all the status information including a detailed heads up display.


    You can even fly your model from your laptop using this kit.


    Please note this is the high powered 500mW version


    The normal range with the supplied antennas is about 1000m If you add an inverted V antenna mounted about 15m high using an active USB extension you can get ranges up to 20,000m with this kit.


    Download the drivers for these: http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

    Learn More
  10. Pixhawk APM Power module with power distribution 120Amp

    Pixhawk APM Power module with power distribution 120Amp

    £30.00

    120Amp Power module & power distribution plate with BEC for Pixhawk
    This connects in line to your Lipo and allows your Pixhawk or Pixraptor to monitor your flight battery.
    The data can then be seen on your minimOSD (On Screen Display) system, Ground Control Station (GCS) it can also trigger failsafe of your Pixhawk or Pixraptor when your battery gets low.
    This unit has a BEC built into it so plugs into the Power port of your Pixhawk or Pixraptor.
    If you have servos connected to your Pixhawk or Pixraptor then you still need another BEC plugged into the one of the Output ports to power your servos.


    These work with up to 6S (24V)

    Learn More

Items 1 to 10 of 25 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction