Flight Controllers

Items 1 to 10 of 37 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction
  1. SiK Radio telemetry kit 915Mhz 500mW Pixhawk Ground Control Station

    SiK Radio telemetry kit 915Mhz 500mW Pixhawk Ground Control Station

    £70.00

    SiK Radio telemetry kit 500mW 915Mhz Ground Control Station for Pixhawk
    These are a pair of TTL SIK radio modules. They are not manufactured by 3DR but are made to the opensource specification of the SIK radio project.


    One unit plugs into the Pixhawk telemetry port and the other into your USB port on your computer or Android Tablet to provide a long range live link to your Pixhawk.


    You can use it to change parameters, load missions and real time Ground Control Station during flights. The flight data screen of Mission planner will show you on a google satellite map where your model is and all the status information including a detailed heads up display.


    You can even fly your model from your laptop using this kit.


    Please note this is the high powered 500mW version


    The normal range with the supplied antennas is about 1000m If you add an inverted V antenna mounted about 15m high using an active USB extension you can get ranges up to 20,000m with this kit.


    Download the drivers for these: http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

    Learn More
  2. 433Mhz SiK Radio telemetry V antenna

    433Mhz SiK Radio telemetry V antenna

    £15.00

    This antenna is tuned to 433Mhz to greatly increase the range of your 3DR SiK Radio telemetry modules.


    Perfect V shape to give maximum range your your 3DR SiK Radio telemetry gear.

    Learn More
  3. WIFI Telemetry module for Pixhawk or APM

    WIFI Telemetry module for Pixhawk or APM

    £35.00

    WIFI Telemetry module for Pixhawk or APM
    These will give you 100m if connected direct to Tablet or if you use an Access point with directional antenna you will get up to 3 miles.
    These have a built in web server so you connect to them over Wifi then you point your web browser at the DHCP server IP from your network info. Then you can connect the WIFI telemetry module to your network. Learn More
  4. Pixhawk STM32 flight controller

    Pixhawk STM32 flight controller

    £67.00

    Pxhawk flight controller with case.


    Also includes the safety arming switch and buzzer.


    We recommend you use the APM Power module to power this flight controller.


    You need a CPPM or SBUS receiver for this or use our PWM to CPPM module or Fr-Sky SBUS to CPPM module.


    Please do not buy this on it's own unless you know what you are doing. If you are unsure then either call us to discuss it, wait for our setup video series to be released or buy one of our ready built models with it.

    Learn More
  5. Pixhawk APM Power module with BEC

    Pixhawk APM Power module with BEC

    £13.00

    Power module with BEC for APM or Pixhawk
    This connects in line to your Lipo and allows your Pixhawk or APM to monitor your flight battery.
    The data can then be seen on your minimOSD (On Screen Display) system, Ground Control Station (GCS) it can also trigger failsafe of your APM when your battery gets low.
    This unit has a BEC built into it so plugs into the Power port of your Pixhawk or APM (remove JP1).
    If you have servos connected to your Pixhawk or APM then you still need another BEC plugged into the one of the Output ports to power your servos.


    These work with up to 7S (28V)

    Learn More
  6. Flight controller anti-vibration plate kit for APM and Crius boards

    Flight controller anti-vibration plate kit for APM and Crius boards

    £8.00

    Flight controller anti-vibration plate kit for APM and Crius boards


    This anti-vibration plate has a counter balance weight to ensure your flight controller is isolated from vibration.


    With this you can normally put your stabilise settings on your flight controller to the max for a super stable flight.

    Learn More
  7. Taranis Mavlink APM Pixhawk Telemetry adapter

    Taranis Mavlink APM Pixhawk Telemetry adapter

    £27.00

    This adapter board converts the Mavlink data from the APM or Pixhawk to Smart Port X8R Taranis receiver data.


    It plugs into the Telemetry port of your APM or Pixhawk and then into the SMart Port of the X8R receiver. Then on your Taranis just select what telemetry data to show on each Telemetry screen. You can have quite a lot of data being fed from the APM or Pixhawk shown on the Taranis and you can also setup the Taranis to provide audible warnings as required.


    See the video above for a demo of it in action.


    New video showing the OpenTx 2.1 firmware upgrade (all our modules are shipping with 2.1 as standard): https://youtu.be/haHwmuN3E1Y


    The flash utility and firmware for the Teensy board are here: Flash Utility Link


    The files to go on your Taranis are here (just grab the zip file): Radio Software Link


    The project page for this module and the source code are here: Project Link

    Learn More
  8. minimOSD On Screen Display system for APM or Pixhawk

    minimOSD On Screen Display system for APM or Pixhawk

    £20.00

    minimOSD On Screen Display system for APM & Pixhawk
    This addon for the APM & Pixhawk plugs into the telemetry port of your APM or Pixhawk then you put your video feed from your camera into one side and your video transmitter in the other side.
    It then overlays the video being sent to your video receiver with the flight data as a full On Screen Display system.
    You can configure the layout & whats is displayed using an FTDI adapter (see related products below).

    Learn More
  9. minimOSD cased version On Screen Display system for Pixhawk

    minimOSD cased version On Screen Display system for Pixhawk

    £25.00

    Cased version of the minimOSD On Screen Display system for Pixhawk or APM flight controllers


    This addon for the Pixhawk or APM plugs into the telemetry port of your Pixhawk/APM then you put your video feed from your camera into one side and your video transmitter in the other side. It then overlays the video being sent to your video receiver with the flight data as a full On Screen Display system. You can configure it using an FTDI adapter (see related products below).
    When trying to program these with your FTDI adapter you will need an adapter cable. If you order this minimOSD and FTDI adapter together then we will supply the cable with the kit.


    These come with the cable to plug them into a Pixhawk. If you need an APM cable then put a note on your order and we will provide them with the APM cable instead.

    Learn More
  10. Ublox Neo8 GPS module with compass

    Ublox Neo8 GPS module with compass

    £32.00

    U-Blox Neo8m GPS and compass module in case


    Very accurate units for our professional builds.

    Learn More

Items 1 to 10 of 37 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction