Parts

Items 1 to 10 of 139 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction
  1. HP2212 multirotor motor 1000Kv (black)

    HP2212 multirotor motor 1000Kv (black)

    £14.00

    HP2212 motor 1000Kv (black)
    These motors are ideal for a 450 quad or 550 hex.
    We use these in our own builds, they have NSK Japanese bearings so run very smooth. The shaft in the centre is very short with a bearing top and bottom so rarely gets bent. The prop adapter screws on the top of the motor which gets bent in crashes instead of the main shaft.


    These have the 4 hole prop adapters with them. along with stainless steel nyloc nuts.

    Learn More
  2. Hobbywing quattro esc for quadcopter builds

    Hobbywing Quattro ESC for Multirotors

    £45.00

    Hobbywing Quattro ESC for Multirotors, these have 4 ESC's in one unit.


    These are flashed with the latest BLHeli firmware for super fast response times, they use the Silabs chips. We do the flashing of these ourselves so you won't get the same results if bnuying from other suppliers.


    These are super compact units which make building a quad much quicker and simplifies your cabling. With long motor leads to suit large quadcopter builds.

    Learn More
  3. HP4108 Multirotor motor 720Kv ideal for 800mm hexacopters

    HP4108 Multirotor motor 720Kv ideal for 800mm hexacopters

    £45.00

    HP4108 Multirotor motor 720Kv ideal for 800mm hexacopters
    4108
    720Kv Learn More
  4. Prop adaptor for HP 2212 (4 hole) adapter

    Prop adaptor for HP 2212 (4 hole) adapter

    £2.00

    Prop adaptor for HP 2212 (4 hole)
    These fit the black HP2212 motor witch have 4 screw holes in the top.
    There is also a 3 hole version available to suit the blue HP2212 motors Learn More
  5. Prop adaptor for blue HP2212 (3 hole) adapter

    Prop adaptor for blue HP2212 (3 hole) adapter

    £2.00

    Prop adaptor for HP2212 (3 hole) adapter
    These fit the blue HP2212 motor witch have 3 screw holes in the top.
    There is also a 4 hole version available to suit the black HP2212 motors Learn More
  6. Prop adaptor for HP4108 motors

    Prop adaptor for HP4108 motors

    £4.00

    These are the 4 hole prop adapters to fit our HP4108 motors Learn More
  7. 5010 620Kv motor for Multi-Rotors

    5010 620Kv motor for Multi-Rotors

    £30.00

    5010 620Kv motor designed specifically for multi-rotors. These are ideal for a 4S configuration and 12" props. Learn More
  8. HP4108 380Kv motor

    HP4108 380Kv motor

    £45.00

    HP4108 380Kv motor for 6S applications Learn More
  9. 45 Amp OPTO NFS multirotor ESC

    45 Amp OPTO NFS multirotor ESC

    £19.00

    45 Amp OPTO NFS multirotor ESC


    These are the NFS versions which have a 16Mhz crystal. Flashed with SImonK firmware for rapid response (490Hz) for use with quadcopter or hexacopter.


    These are not normal ESC's, they are specifically made for multirotor use.


    They have 3mm bullet sockets pre-soldered & heatshrunk on the motor wires.


    We recommend removing the red and black wires from the signal lead to your flight controller to reduce the vibration transfer to your flight controller. When used with our flight controller anti-vibration plate for APM2.6 and Crius AIO Pro board this makes for a super stable flying multirotor copter.

    Learn More
  10. Tarot 4006 620Kv motor for tarot 680Pro builds

    Tarot 4006 620Kv motor for tarot 680Pro builds

    £35.00

    These motors work well with the tarot 680Pro frames. With 12" props and 4S lipo they delivery perfect lift for the hex with a Tarot 2 axis gimbal and GoPro camera.


    If you want heavy lift then look at our HP4108 motors as they offer more power but are not quite as efficient.

    Learn More

Items 1 to 10 of 139 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Descending Direction