Accessories

Items 1 to 10 of 25 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  1. Pixhawk APM Power module with BEC

    Pixhawk APM Power module with BEC

    £13.00

    Power module with BEC for APM or Pixhawk
    This connects in line to your Lipo and allows your Pixhawk or APM to monitor your flight battery.
    The data can then be seen on your minimOSD (On Screen Display) system, Ground Control Station (GCS) it can also trigger failsafe of your APM when your battery gets low.
    This unit has a BEC built into it so plugs into the Power port of your Pixhawk or APM (remove JP1).
    If you have servos connected to your Pixhawk or APM then you still need another BEC plugged into the one of the Output ports to power your servos.


    These work with up to 7S (28V)

    Learn More
  2. H500 waterproof tough case

    H500 waterproof tough case

    £75.00

    These cases are super tough and waterproof. They have 3 layers of foam of which one layter is pick and pluck so easy to pull out and make sockets for batteries and accessories in the case.


    We use an electric carving knife to cut the normal layers of foam to fit around the H500 quads. Leaving the pick and pluck layer for you to adjust to fit your accessories in.


    Internal dimensions are: 500mm x 355mm x 200mm


    Exterior size is: 570mm x 420mm x 215mm


    Lid depth is 55mm & base depth is 145mm

    Learn More
  3. Tarot 650 Sport waterproof tough case

    Tarot 650 Sport waterproof tough case

    £88.00

    These cases are super tough and waterproof which fit our tarot 650 Sport builds (with props off).


    They have 3 layers of foam of which two layers are pick and pluck so easy to pull out and make sockets for batteries and accessories in the case.


    Internal dimensions are: 650mm x 350mm x 180mm


    Exterior size is: 730mm x 415mm x 190mm


    Lid depth is 50mm & base depth is 130mm

    Learn More
  4. Hard Waterproof Cary case for 250 FPV racer

    Hard Waterproof Cary case for 250 FPV racer

    £39.00

    Keep your FPV racer safe in a waterproof hard carry case with space for spare props and batteries.


    These have pick & pluck foam inserts which we will cut out the area for your 250 quad and batteries ordered then you can pluck out extra sections for other parts and tools you may require.

    Learn More
  5. Pixhawk APM Power module with power distribution 120Amp

    Pixhawk APM Power module with power distribution 120Amp

    £30.00

    120Amp Power module & power distribution plate with BEC for Pixhawk
    This connects in line to your Lipo and allows your Pixhawk or Pixraptor to monitor your flight battery.
    The data can then be seen on your minimOSD (On Screen Display) system, Ground Control Station (GCS) it can also trigger failsafe of your Pixhawk or Pixraptor when your battery gets low.
    This unit has a BEC built into it so plugs into the Power port of your Pixhawk or Pixraptor.
    If you have servos connected to your Pixhawk or Pixraptor then you still need another BEC plugged into the one of the Output ports to power your servos.


    These work with up to 6S (24V)

    Learn More
  6. 433Mhz SiK Radio Telemetry BlueTooth adapter

    433Mhz SiK Radio Telemetry BlueTooth adapter

    £45.00

    This unit is a Bluetooth 433Mhz SiK Radio telemetry module.


    It allows android devices that do not support host USB devices to use DroidPlanner or 3DR Tower with a single telemetry module on the model.


    It has a built in Lipo battery that is charged by plugging it into a USB port.
    It can also plug into the USB port of your laptop to connect directly over the 433Mhz telemetry without the bluetooth link.
    Connection via USB is also used to update settings on the module.


    This is the ground module unit only and does not include the remote unit that goes on the model.
    The PIN code for pairing these is 0008 

    Learn More
  7. 915Mhz SiK Radio Telemetry BlueTooth adapter

    915Mhz SiK Radio Telemetry BlueTooth adapter

    £45.00

    This unit is a Bluetooth 915Mhz SiK Radio telemetry module.


    It allows android devices that do not support host USB devices to use DroidPlanner or 3DR Tower with a single telemetry module on the model.


    It has a built in Lipo battery that is charged by plugging it into a USB port.
    It can also plug into the USB port of your laptop to connect directly over the 915Mhz telemetry without the bluetooth link.
    Connection via USB is also used to update settings on the module.


    This is the ground module unit only and does not include the remote unit that goes on the model.
    The PIN code for pairing these is 0008 

    Learn More
  8. 433Mhz SiK Radio Telemetry BlueTooth adapter 500mW

    433Mhz SiK Radio Telemetry BlueTooth adapter 500mW

    £65.00

    This unit is a Bluetooth 433Mhz SiK Radio telemetry 500mW long range module. The standard version is 100mW.


    It allows android devices that do not support host USB devices to use DroidPlanner or 3DR Tower with a single telemetry module on the model.


    It has a built in Lipo battery that is charged by plugging it into a USB port.
    It can also plug into the USB port of your laptop to connect directly over the 433Mhz telemetry without the bluetooth link.
    Connection via USB is also used to update settings on the module.


    This is the ground module unit only and does not include the remote unit that goes on the model.
    The PIN code for pairing these is 0008 

    Learn More
  9. 915Mhz SiK Radio Telemetry BlueTooth adapter 500mW

    915Mhz SiK Radio Telemetry BlueTooth adapter 500mW

    £65.00

    This unit is a Bluetooth 915Mhz SiK Radio telemetry 500mW long range module. The standard version is 100mW.


    It allows android devices that do not support host USB devices to use DroidPlanner or 3DR Tower with a single telemetry module on the model.


    It has a built in Lipo battery that is charged by plugging it into a USB port.
    It can also plug into the USB port of your laptop to connect directly over the 433Mhz telemetry without the bluetooth link.
    Connection via USB is also used to update settings on the module.


    This is the ground module unit only and does not include the remote unit that goes on the model.
    The PIN code for pairing these is 0008 

    Learn More
  10. 915Mhz SiK Radio Telemetry BlueTooth adapter 500mW complete kit

    915Mhz SiK Radio Telemetry BlueTooth adapter 500mW complete kit

    £85.00

    This kit has a Bluetooth 915Mhz SiK Radio telemetry 500mW long range module along with a 500mW air module. The standard version is 100mW.


    It allows android devices that do not support host USB devices to use DroidPlanner or 3DR Tower with a single telemetry module on the model.


    It has a built in Lipo battery that is charged by plugging it into a USB port.
    It can also plug into the USB port of your laptop to connect directly over the 433Mhz telemetry without the bluetooth link.
    Connection via USB is also used to update settings on the module.


    This is the ground module unit only and does not include the remote unit that goes on the model.
    The PIN code for pairing these is 0008 

    Learn More

Items 1 to 10 of 25 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction