Professional Series

8 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Tarot X6 carbon fibre Hexacopter complete built and test flown system

    Tarot X6 carbon fibre Hexacopter complete built and test flown system

    As low as: £1,750.00

    Our new Pro Spec Tarot X6 carbon fibre folding hexacopter with Pixhack V3 flight controller and Neo8 Here GPS.


    These are powered by Tarot 5108 340Kv motors with lots of power to spin the 18"x5.2" folding carbon fibre props that we supply with them.


    These come with the Pixhack V3 flight controller as standard which has perfect internal vibration dampening. With the Here Neo8 GPS/compass as standard for super accurate (0.6m) position hold. The GPS Module also integrates the Status LED and Safety switch for a very professional integrated build.


    If you select the X8R receiver or Taranis combo then we include the Mavlink telemetry module as standard.


    This is a very capable and stable rig, ideal for carrying SLR and other large cameras or other payloads. We also have drop mechanisms for payload deployment.


    These will fly for about 30 minutes with a 6S 16Ah Lipo.


    These units are custom built for each order and test flown with the content of your order before being dispatched so you can just take them out of the box and start flying without having to worry about calibrating or setting things up.


    We normally complete orders for systems within 1 to 2 weeks from date of order depending on work load. You can always call us or check your order status which is updated and emailed to you during the process.


    We use HobbyWing X-Rotor ESC's with built in RGB navigation LED's which can be programmed for any range of colour.


    For a complete aerial photography package just create an account on our shop then contact us by email and we will guide you through the ideal product selection to suit your needs.


    The 3DR Radio telemetry kit allows you to control the quadcopter from your laptop or android tablet

    Learn More
  2. DR1 Enduro carbon fibre Quadcopter complete built and test flown system

    DR1 Enduro carbon fibre Quadcopter complete built and test flown system

    As low as: £1,650.00

    Our new Pro Spec DR1 carbon fibre folding quadcopter with Pixhack flight controller and Here Neo8 GPS.


    These are powered by T-Motor 4006 380Kv motors with lots of power to spin the 16"x5.2" folding carbon fibre props that we supply with them.


    These come with the Pixhack flight controller as standard which has perfect internal vibration dampening. With the Here Neo8 GPS/compass as standard for super accurate (0.6m) position hold. The GPS Module also integrates the Status LED and Safety switch for a very professional integrated build.


    Our Professional systems also include Wifi Telemetry as standard and LCD status display system built into them which provides GPS status, flight mode, warnings & battery voltage.


    If you select the X8R receiver or Taranis combo then we include the Mavlink telemetry module as standard.


    This is a very capable and stable rig, ideal for compact cameras for survey like the Mapir range or other payloads. We also have drop mechanisms for payload deployment.


    These will fly for about 60 minutes with a 6S 16Ah Battery.


    These units are custom built for each order and test flown with the content of your order before being dispatched so you can just take them out of the box and start flying without having to worry about calibrating or setting things up.


    We normally complete orders for systems within 1 to 2 weeks from date of order depending on work load. You can always call us or check your order status which is updated and emailed to you during the process.


    We use HobbyWing X-Rotor ESC's with built in RGB navigation LED's which can be programmed for any range of colour.


    For a complete aerial survey package just create an account on our shop then contact us by email and we will guide you through the ideal product selection to suit your needs.


    The 3DR Radio telemetry kit or Long Range Wifi telemetry system allows you to control the quadcopter from your laptop or android tablet

    Learn More
  3. H500 Pro Spec Folding carbon fibre Quadcopter complete built and test flown system

    H500 Pro Spec Folding carbon fibre Quadcopter complete built and test flown system

    As low as: £570.00

    Our new Pro Spec build of our H500 carbon fibre folding quadcopter with Pixraptor flight controller embeded in the centre of the frame and Neo8 GPS as standard.


    These are powered by X4 3508 710Kv motors with lots of power to spin the 12"x4" direct fit carbon fibre props that we supply with them. Using the direct fit props provides added strength and better balancing due to not having a hub.


    These come with the Pixraptor flight controller embeded into the centre of the frame as standard. With the Neo8 GPS/compass as standard for super accurate (0.6m) position holding.


    If you select the X8R receiver or Taranis combo then we include the Mavlink telemerty module as standard.


    This is a very capable and stable rig, ideal for travelling as it folds down into a very compact format with the props still on so.


    They come in a waterproof hard tough case so will be protected during transport.


    Brushless gimbal shown is NOT included as standard.


    They are very light weight so with a 4S 5200mAh lipo they are 1.6Kg all up flying weight. So you should get about 20 minutes of flying time. Or 30 minutes when using an 8000mAh Lipo.


    These units are custom built for each order and test flown with the content of your order before being dispatched so you can just take them out of the box and start flying without having to worry about calibrating or setting things up.


    We normally complete orders for systems within 1 to 2 weeks from date of order depending on work load. You can always call us or check your order status which is updated and emailed to you during the process.


    See full description below for more information.

    Learn More
  4. Tarot 650 Sport Pro Spec Folding carbon fibre Quadcopter complete built and test flown system in waterproof carry case

    Tarot 650 Sport Pro Spec Folding carbon fibre Quadcopter complete built and test flown system in waterproof carry case

    As low as: £659.00

    Our new Pro Spec Tarot 650 Sport carbon fibre folding quadcopter with Pixhawk flight controller and Neo8 GPS as standard.


    We are now including the Tough Waterproof case with these, see the pictures below.


    These are powered by X4 3508 710Kv motors with lots of power to spin the 12"x4" direct fit carbon fibre props that we supply with them. Using the direct fit props provides added strength and better balancing due to not having a hub.


    These come with the Pixhawk flight controller as standard. With the Neo8 GPS/compass as standard for super accurate (0.6m) position holding.


    If you select the X8R receiver or Taranis combo then we include the Mavlink telemerty module as standard.


    This is a very capable and stable rig, ideal for travelling as it folds down into a very compact format with the props still on so.


    They are very light weight so with a 4S 5200mAh lipo they are 1.6Kg all up flying weight. So you should get about 15 minutes of flying time. Or 30 minutes when using an 10,000mAh Lipo.


    These units are custom built for each order and test flown with the content of your order before being dispatched so you can just take them out of the box and start flying without having to worry about calibrating or setting things up.


    We normally complete orders for systems within 1 to 2 weeks from date of order depending on work load. You can always call us or check your order status which is updated and emailed to you during the process.


    Youtube Video


    See full description below for more information.

    Learn More
  5. Tarot 680Pro series Pixhawk GPS Hexacopter Fully built system

    Tarot 680Pro series Pixhawk GPS Hexacopter Fully built system

    As low as: £679.00

    This is our Tarot 680 pro series Pixhawk with Neo 8 GPS controlled Hexacopter system.


    It has the powerful X-3508 motors and 12" carbon fibre props as standard. It is a fully carbon fibre frame with built in landing gear.


    If you select the X8R receiver or Taranis combo then we include the Mavlink telemerty module as standard.


    It comes with a carbon effect hood to keep electronics safe inside (do not fly these in the rain!).


    These have a lot of lift so you can use a 4S 10,000mAh or 2 x 4S 5200mAh lipos per flight giving you about 30 minutes even when carrying a gimbal and camera gear.


    Please read the full description below to understand the configuration options.


    Auto pilot missions are created using any mavlink compatible ground control station software like Mission Planner which is free to download: CLICK HERE TO DOWNLOAD

    Learn More
  6. Y6 750mm carbon fibre Hexacopter complete built and test flown system

    Y6 750mm carbon fibre Hexacopter complete built and test flown system

    As low as: £810.00

    Our new Pro Spec build Y6 750mm carbon fibre folding Hexacopter with Pixhawk flight controller and Neo8 GPS in a waterproof carry case.


    These are powered by 6S Lipo powering X5 3515 400Kv motors with lots of power to spin the 14"x4.8" direct fit carbon fibre props that we supply with them. Using the direct fit props provides added strength and better balancing due to not having a hub.


    These come with the Pixhawk flight controller as standard. With the Neo8 GPS/compass as standard for super accurate (0.6m) position holding.


    This is a very capable and stable rig, ideal for aerial filming with a 3Axis gimbal system.


    They are very light weight so with a 6S 10,000mAh lipo they are 2Kg all up flying weight. So you should get about 15 to 20 minutes of flying time. Or up to 30 minutes when using a 16000mAh Lipo.


    These units are custom built for each order and test flown with the content of your order before being dispatched so you can just take them out of the box and start flying without having to worry about calibrating or setting things up.


    We normally complete orders for systems within 1 to 2 weeks from date of order depending on work load. You can always call us or check your order status which is updated and emailed to you during the process.


    See full description below for more information.

    Learn More
  7. X8 carbon fibre Hexacopter complete built and test flown system

    X8 carbon fibre Hexacopter complete built and test flown system

    As low as: £890.00

    Our new Pro Spec build X8 carbon fibre folding Hexacopter with Pixraptor flight controller and Neo8 GPS as standard.


    These are powered by 6S Lipo powering X5 3515 400Kv motors with lots of power to spin the 14"x4.8" direct fit carbon fibre props that we supply with them. Using the direct fit props provides added strength and better balancing due to not having a hub.


    These come with the Pixraptor flight controller as standard. With the Neo8 GPS/compass as standard for super accurate (0.6m) position holding.


    This is a very capable and stable rig, ideal for aerial filming with a 3Axis gimbal system.


    They are very light weight so with a 6S 10,000mAh lipo they are just over 2.3Kg all up flying weight. So you should get about 15 minutes of flying time. Or up to 25 minutes when using an 16000mAh Lipo.


    These units are custom built for each order and test flown with the content of your order before being dispatched so you can just take them out of the box and start flying without having to worry about calibrating or setting things up.


    The battery tray is vibration mounted which is also the Gimbal mount so the mass of the battery acts as the vibration dampener making filming very smooth.


    We normally complete orders for systems within 1 to 2 weeks from date of order depending on work load. You can always call us or check your order status which is updated and emailed to you during the process.


    See full description below for more information.

    Learn More
  8. Half day labour for training

    Half day labour for training

    £200.00

    Spend half a day with us going through the setup of your model, how to get the best out of it and flying it in our flying field. Learn More

8 Item(s)

per page

Grid  List 

Set Descending Direction