Flight Controllers

Items 1 to 10 of 35 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction
  1. Pixhawk 4 mini flight controller with GPS and PDB

    Pixhawk 4 mini flight controller with GPS and PDB

    £189.00

    Pixhawk 4 mini latest flight controller
    includes flight controller, cable pack, GPS, Power distribution board Learn More
  2. Pixhack 2.8.4 Pro Pixhawk based flight controller

    Pixhack 2.8.4 Pro Pixhawk based flight controller

    £78.00

    This is the Pro Pixhack flight controller.


    It has built in vibration dampening so no need to use a vibration plate. Making them ideal for our H500 systems as they will fit inside the frame.


    We recommend you use the APM/Pixhawk Power module to power this flight controller.


    You need a CPPM or SBUS receiver for this or use our PWM to CPPM module or Fr-Sky SBUS to CPPM module.

    Learn More
  3. Pixhawk STM32 flight controller

    Pixhawk STM32 flight controller

    £67.00

    Pxhawk flight controller with case.


    Also includes the safety arming switch and buzzer.


    We recommend you use the APM Power module to power this flight controller.


    You need a CPPM or SBUS receiver for this or use our PWM to CPPM module or Fr-Sky SBUS to CPPM module.


    Please do not buy this on it's own unless you know what you are doing. If you are unsure then either call us to discuss it, wait for our setup video series to be released or buy one of our ready built models with it.

    Learn More
  4. Pixhawk APM Power module with BEC

    Pixhawk APM Power module with BEC

    £13.00

    Power module with BEC for APM or Pixhawk
    This connects in line to your Lipo and allows your Pixhawk or APM to monitor your flight battery.
    The data can then be seen on your minimOSD (On Screen Display) system, Ground Control Station (GCS) it can also trigger failsafe of your APM when your battery gets low.
    This unit has a BEC built into it so plugs into the Power port of your Pixhawk or APM (remove JP1).
    If you have servos connected to your Pixhawk or APM then you still need another BEC plugged into the one of the Output ports to power your servos.


    These work with up to 7S (28V)

    Learn More
  5. Taranis Mavlink APM Pixhawk Telemetry adapter

    Taranis Mavlink APM Pixhawk Telemetry adapter

    £27.00

    This adapter board converts the Mavlink data from the APM or Pixhawk to Smart Port X8R Taranis receiver data.


    It plugs into the Telemetry port of your APM or Pixhawk and then into the SMart Port of the X8R receiver. Then on your Taranis just select what telemetry data to show on each Telemetry screen. You can have quite a lot of data being fed from the APM or Pixhawk shown on the Taranis and you can also setup the Taranis to provide audible warnings as required.


    See the video above for a demo of it in action.


    New video showing the OpenTx 2.1 firmware upgrade (all our modules are shipping with 2.1 as standard): https://youtu.be/haHwmuN3E1Y


    The flash utility and firmware for the Teensy board are here: Flash Utility Link


    The files to go on your Taranis are here (just grab the zip file): Radio Software Link


    The project page for this module and the source code are here: Project Link

    Learn More
  6. Pixhawk APM Power module with power distribution

    Pixhawk APM Power module with power distribution

    £16.00

    Power module & power distribution plate with BEC for Pixhawk or Pixraptor
    This connects in line to your Lipo and allows your Pixhawk or Pixraptor to monitor your flight battery.
    The data can then be seen on your minimOSD (On Screen Display) system, Ground Control Station (GCS) it can also trigger failsafe of your Pixhawk or Pixraptor when your battery gets low.
    This unit has a BEC built into it so plugs into the Power port of your Pixhawk or Pixraptor.
    If you have servos connected to your Pixhawk or Pixraptor then you still need another BEC plugged into the one of the Output ports to power your servos.


    These work with up to 6S (24V)

    Learn More
  7. Ublox Neo8 GPS module with compass

    Ublox Neo8 GPS module with compass

    £32.00

    U-Blox Neo8m GPS and compass module in case


    Very accurate units for our professional builds.

    Learn More
  8. I2C splitter

    I2C splitter

    £8.00

    I2C splitter for plugging more than one I2C device into your Pixhawk flight controller.
    Since the compass uses the I2C port, you might also want to plug in an LCD display or Air Speed sensor then you need to use this IIC splitter to provide the extra ports.
    Learn More
  9. Pixhawk LCD Display system 1.3"

    Pixhawk LCD Display system 1.3"

    £28.00

    Pixhawk LCD Display system 1.3"
    Mounted in a 3D printed case Learn More
  10. SiK Radio telemetry kit 915Mhz 500mW Pixhawk Ground Control Station

    SiK Radio telemetry kit 915Mhz 500mW Pixhawk Ground Control Station

    £70.00

    SiK Radio telemetry kit 500mW 915Mhz Ground Control Station for Pixhawk
    These are a pair of TTL SIK radio modules. They are not manufactured by 3DR but are made to the opensource specification of the SIK radio project.


    One unit plugs into the Pixhawk telemetry port and the other into your USB port on your computer or Android Tablet to provide a long range live link to your Pixhawk.


    You can use it to change parameters, load missions and real time Ground Control Station during flights. The flight data screen of Mission planner will show you on a google satellite map where your model is and all the status information including a detailed heads up display.


    You can even fly your model from your laptop using this kit.


    Please note this is the high powered 500mW version


    The normal range with the supplied antennas is about 1000m If you add an inverted V antenna mounted about 15m high using an active USB extension you can get ranges up to 20,000m with this kit.


    Download the drivers for these: http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

    Learn More

Items 1 to 10 of 35 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction