Receivers

9 Item(s)

per page

Grid  List 

Set Descending Direction
  1. Turnigy 9x receiver

    Turnigy 9x receiver

    £12.00

    Turnigy 9x receiver
    This is a full range receiver to put on another model to work with your Turnigy 9x radio.
    The Turnigy 9x radio can support up to 8 models so you can switch between 8 different models with one transmitter. Learn More
  2. FrSky Taranis flashing service

    FrSky Taranis flashing service

    £12.00

    This is a labour service to flash your FrSky Taranis radio and receiver with either EU, EU LBT or international firmware so it will bind/work with your X8R or X series receiver.
    If you have a receiver with a 2015 sticker on the back of it then it probably has the EU firmware on it, if the sticker says LBT then it is EU LBT firmware on it. If there is no sticker then it probably has the international firmware on it.
    You can also check by holding the rudder trim and aileron trim switches to the centre whilst powering on, if it says Bootloader with EU in the name then it is likely an EU firmware radio.


    If you send us your radio then we will just flash it with the firmeare you select. If you send us your radio and receiver then we will flash both with the firmware you select.


    It is best to have the EU LBT firmware as receivers purchased in the EU will have the EU LBT firmware on them now.

    Learn More
  3. FrSky Rx flashing service for X8R or other X series FrSky receivers

    FrSky Rx flashing service for X8R or other X series FrSky receivers

    £10.00

    This is a labour service to flash your FrSky X series receiver with either EU LBT or international firmware so it will bind/work with your Taranis radio.
    If you have a Taranis radio with a 2015 sticker on the back of it then your radio probably has the EU firmware on it, if it has LBT sticker then it is an EU LBT receiver. If there is no sticker then it probably has the international firmware on it.
    You can also check by holding the rudder trim and aileron trim switches to the centre whilst powering on, if it says Bootloader with EU in the name then it is likely and EU firmware radio.


    The new receivers purchased in the EU will now have EU LBT firmware as standard so it is best to select EU LBT for future compatibility.

    Learn More
  4. CPPM SBUS PWM convertor

    CPPM SBUS PWM convertor

    £12.00

    This device will convert almost everything to everything.
    SBUS input to CPPM and PWM output (for SBUS receivers on an APM whilst also providing PWM ports for your gimbal control)
    PWM input to CPPM output (for reducing cabling when using a standard receiver with your APM)
    Having SBUS to CPPM and PWM allows you to have channels for your APM whilst also providing standard PWM ports for plugging the tilt control of your gimbal for example.

    Learn More
  5. FrSky receiver or Taranis Tx module programming cable with FTDI adapter

    FrSky receiver or Taranis Tx module programming cable with FTDI adapter

    £18.00

    This is an FTDI adapter and programming cable for flashing the FrSky X series receivers or the internal module of the Taranis radio to get around the Bind issues people are having due to the difference between the EU firmware and international firmware.


    If you have a pre 2015 Taranis and new a new receiver or a pre 2015 X series receiver (like the X8R) and a new Taranis then you will probably need to flash one of them to get them onto the same firmware.


    See our video about doing this.


    The FTDI adapter is not a standard one as the Tx & Rx lines have to have the signals inverted (not just swapping them) which involves re-programming the FTDI adapter, so I thought it would be easier to offer these kits to the public.

    Learn More
  6. FrSky S-BUS to CPPM receiver adapter

    FrSky S-BUS to CPPM receiver adapter

    £14.00

    This connects to your X8R SBUS port and converts the signal to a CPPM signal to connect to your APM2.6 with a single 3 pin servo cable.


    Great for reducing the cabling and vibration transfer to your APM2.6 flight controller.

    Learn More
  7. DSMx 6 channel receiver with CPPM (park range)

    DSMx 6 channel receiver with CPPM (park range)

    £14.00

    This is the new R615x 6 channel receiver that binds with either DSM2 or DSMx radio gear.


    It has CPPM output on the bind/bat port so is ideal for flight controllers like the APM. On your APM just put a jumper across the signal pins 2 & 3 then plug the bat bind port of this reaceiver into port one and get all 6 channels with only one servo lead needed. This again helps to prevent vibration transfer from the frame making your APM even more stable.

    Learn More
  8. DSM2 satellite receiver

    DSM2 satellite receiver

    £14.00

    These fit our any of full range DSM2 receivers. Learn More
  9. DSM2 Spektrum & JR compatible Orange 6 channel receiver (full range)

    DSM2 Spektrum & JR compatible Orange 6 channel receiver (full range)

    £17.00

    DSM2 Spektrum & JR compatible Orange 6 channel receiver (full range)
    These are the full range Orange Rx 6 channel receivers, they have a range of about 2,000m in clear line of sight.
    They are ideal for most models.
    They have failsafe function.
    This version has a full range antenna.
    This version has a satellite port.

    Learn More

9 Item(s)

per page

Grid  List 

Set Descending Direction