Transmitters

Items 1 to 10 of 11 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. FrSky Taranis Q X7 Radio

    FrSky Taranis Q X7 Radio

    £105.00

    FrSky Taranis Q X7 radio with full telemetry Learn More
  2. FrSky Taranis radio transmitter & receiver combo

    FrSky Taranis radio transmitter & receiver combo

    £229.99

    Fr-Sky Taranis radio transmitter & receiver combo.


    This is a brilliant transmitter for any air model. It has full telemetry built in, talks to you and up to 16 channels.
    It comes with a 16 channel telemetry receiver as standard.
    With side paddles make it ideal for FPV camera control or slope soaring/gliders.
    Plug it into your computer and use Companion9x to make configuration a breeze and load new software & audio.
    Has 60 model memories and a micro SD card for unlimited models.
    It comes with a rechargeable battery and charger.
    This Tx uses OpenTx firmware running on an STM32 board in a case identical to the JR 9X combined with fantastic quality gimbals make this Fr-Sky radio the best on the market.


    Please note the new version does not come with an Aluminium case.


    We have a video showing how to get 16 channels from a single X8R receiver with the taranis: http://youtu.be/AnDQGFhsHjs?list=UUQx4lLeXHIzZPBBDHC50O2w

    Learn More
  3. Taranis Mavlink APM Pixhawk Telemetry adapter

    Taranis Mavlink APM Pixhawk Telemetry adapter

    £27.00

    This adapter board converts the Mavlink data from the APM or Pixhawk to Smart Port X8R Taranis receiver data.


    It plugs into the Telemetry port of your APM or Pixhawk and then into the SMart Port of the X8R receiver. Then on your Taranis just select what telemetry data to show on each Telemetry screen. You can have quite a lot of data being fed from the APM or Pixhawk shown on the Taranis and you can also setup the Taranis to provide audible warnings as required.


    See the video above for a demo of it in action.


    New video showing the OpenTx 2.1 firmware upgrade (all our modules are shipping with 2.1 as standard): https://youtu.be/haHwmuN3E1Y


    The flash utility and firmware for the Teensy board are here: Flash Utility Link


    The files to go on your Taranis are here (just grab the zip file): Radio Software Link


    The project page for this module and the source code are here: Project Link

    Learn More
  4. FrSky Taranis flashing service

    FrSky Taranis flashing service

    £12.00

    This is a labour service to flash your FrSky Taranis radio and receiver with either EU, EU LBT or international firmware so it will bind/work with your X8R or X series receiver.
    If you have a receiver with a 2015 sticker on the back of it then it probably has the EU firmware on it, if the sticker says LBT then it is EU LBT firmware on it. If there is no sticker then it probably has the international firmware on it.
    You can also check by holding the rudder trim and aileron trim switches to the centre whilst powering on, if it says Bootloader with EU in the name then it is likely an EU firmware radio.


    If you send us your radio then we will just flash it with the firmeare you select. If you send us your radio and receiver then we will flash both with the firmware you select.


    It is best to have the EU LBT firmware as receivers purchased in the EU will have the EU LBT firmware on them now.

    Learn More
  5. Quanum I8 mode2 Radio transmitter and PPM receiver

    Quanum I8 mode2 Radio transmitter and PPM receiver

    £75.00

    This radio is perfectly suited to our Pixhawk and APM flight controllers as it has a 6 position flight control knob for switching flight modes. It then displays the selected flight on the LED display.
    It also has a 3 position switch and 2 variable sliders on the top to control a gimbal and waypoint speed.
    The radio has a lipo in the back and USB port for charging.
    The receiver has PWM standard outputs as well as a CPPM output.


    All this makes it a perfect basic starter radio for a Pixhawk or APM based model. It will work with any other flight controller or model as well but it has been made with the Ardupilot system in mind.


    Please note this radio does not have multi model settings so is not suitable if you want to use the same radio for multiple models with different settings.

    Learn More
  6. Turnigy 9x transmitter & receiver

    Turnigy 9x transmitter & receiver

    £97.00

    Turnigy 9x transmitter & receiver
    This is a great entry level transmitter ideal for FPV, it has 8 channels and failsafe
    Comes with a receiver
    These can be programmed for up to 8 different models making them ideal for all your planes, helicopters and multirotors.
    These work great with all our quadocpters and hexacopters.
    It has a dial which is perfect for controlling your camera angle when doing FPV or aerial photography. Learn More
  7. Turnigy 9x receiver

    Turnigy 9x receiver

    £12.00

    Turnigy 9x receiver
    This is a full range receiver to put on another model to work with your Turnigy 9x radio.
    The Turnigy 9x radio can support up to 8 models so you can switch between 8 different models with one transmitter. Learn More
  8. FrSky receiver or Taranis Tx module programming cable with FTDI adapter

    FrSky receiver or Taranis Tx module programming cable with FTDI adapter

    £18.00

    This is an FTDI adapter and programming cable for flashing the FrSky X series receivers or the internal module of the Taranis radio to get around the Bind issues people are having due to the difference between the EU firmware and international firmware.


    If you have a pre 2015 Taranis and new a new receiver or a pre 2015 X series receiver (like the X8R) and a new Taranis then you will probably need to flash one of them to get them onto the same firmware.


    See our video about doing this.


    The FTDI adapter is not a standard one as the Tx & Rx lines have to have the signals inverted (not just swapping them) which involves re-programming the FTDI adapter, so I thought it would be easier to offer these kits to the public.

    Learn More
  9. DJI DT7 2.4Ghz remote controller and DR16 receiver

    DJI DT7 2.4Ghz remote controller and DR16 receiver

    £75.00

    DJI DT7 radio with DR16 receiver with SBUS output works well with our 250 FPV racer quads.


    It is a lovely feeling radio with a built lipo battery with simple controls perfect for FPV racing. It also has a spring centre wheel which could be used for camera control or even thruster control! More on that as we release the FPV racer upgrades.

    Learn More
  10. 3S 1500mAh LiFe battery for Transmitters

    3S 1500mAh LiFe battery for Transmitters

    £15.00

    3S 1500mAh LiFe battery for Transmitters
    These fit into the 4x2 battery tray of transmitters like the Turnigy9x
    They have voltage cutoff protection so won't get pulled too low if left running. Learn More

Items 1 to 10 of 11 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction